• It only seems ridiculous because you forgot some intermediates: 5.5 yards = 1 rod, 4 rods = 1 chain, 10 chain = 1 furlong, and 8 furlong = 1 mile. So just gotta remember 12, 3, 5.5, 4, 10, 8. Super simple.

  • 13 days

    It’s obvious that there’s 1760 yards in a mile.

    There’s 22 yards in a chain, which we can all remember because of the 22 yard line in rugby.

    There are 10 chains in a furlong, which fans of metric can’t complain about.

    There are 8 furlongs in a mile, just like there are 8 pints in a gallon.

    And 22x10x8 = 11x10x16 and 11 is easy to multiply by in your head, so it’s really very simple to get to 1760.

    /s

  • Do americans actually do math with imperial system at school? That must be a nightmare and have conversion errors between units.

    • This is a common misconception. Americans can’t do math and don’t learn anything at school

    • There’s almost never a need to involve units outside of science which typically is metric anyway. Also most of these units aren’t really ever converted between, no one gives a measurement as 1 mile 300 yards 2 feet 6 inches.

      • no one gives a measurement as 1 mile 300 yards 2 feet 6 inches.

        When this topic came up yet another time previously, USian engineers proudly chimed in saying that their software accepts any kinds of units and converts between them as needed, so they put in US units without bothering about whether metric units are used elsewhere in the project. Ergo, someone does in fact give measurements like in your example.

        • I have very occasionally seen measurements given in yd + in or yd. + dec ft. I have never once seen measurements given in any of yd + ft + in, mi + yd, mi + yd + ft and definitely never in mi + yd + ft + in. That would be like giving a measurement in km + dm + cm + mm, there’s just no reason to do it. Any cad software I’ve ever used is capable of handling mixed units because it’s trivial to implement, but I would be willing to bet it’s one of the most underutilized features.

    • Kinda… The classes “teach” imperial but guns/bullets are metric

      • So the most American things in America are using the least American measurement system?

      • It’s a pretty heavy mix, many of the most popular rounds are also referenced by their metric size but they’re not usually ‘useful’ sizes in either standard or metric.

        For example:

        • .22 LR = .223in = 5.56 NATO
        • 9mm = .357 mag
        • .40 S&W = 10mm Auto
        • .308 = 7.62mm
        • .44 = no common metric eq.
        • .45 = no common metric eq.
        • .50 = 12.7mm
  • Uh, no.

    10 feet = 1 decafoot

    100 centiyards = 1 yard

    1x10^18 attoacres = 1 acre

      • 1 megametre equals: 0.001 gigametres 0.000001 terametres 0.000000001 petametres

        Meanwhile, 1 megameter is the same as: 0.001 gigameters 0.000001 terameters 0.000000001 petameters

        • True, I did not mean my comment as a real conversion tho.

          Now, speaking of megameters 😈 I’m pretty sure you can tell me which prefix corresponds to this from the top of your head. One of my favorite ones ever alongside its negative.

          n-meter = 1,000,000,000,000,000,000,000,000 megameters.

  • one thing i enjoy way more than i should is use units that are technically correct, but no one uses them like ever.

    like megagrams instead of metric tonnes.

    or 1 dekameter instead of 10 meters.

    • 12 days

      I only use metric when it’s in forms nobody else uses or recognizes at a glance because I need to be difficult. Decimeter is perfect for like, height of a person, for example. Why do they use CM?

    • I measure battery capacity and electricity consumption in J/kJ/MJ, as intended. None of that kWh bullshit.

      It also makes for fun comparison with energy value of foods.

      Energy is energy, after all.

  • Americans choose to meassure thier dicks with the thumb of a british king instead of using meters… or GIGAmeters… there are no correct awnsers, right?

  • I’ve said it on this platform before: I will build furniture in inches until my hands can’t hold a chisel anymore. The inch system arose around the needs of carpentry and woodworking, it works in base 12, which is outright superior to base 10, especially when you divide by 3 and 4 more often than by 5.

    Also, the closest tape measure I have to hand is my 5m metric tape. I build things in metric, just…not furniture.

    • 12 days

      A dozenal metric system would work as well as the decimal metric system, as long as everything else was base-12:

      in base 12 in base 10
      1m’m = 10⁻³m = 0.001m 1m’m = 12⁻³m = 1/1728m
      1c’m = 10⁻²m = 0.01m 1c’m = 12⁻²m = 1/144m
      1m = 1m 1m = 1m
      1k’m = 10³m = 1000m 1k’m = 12³m = 1728m

      Since we’re at this might as well say the day has 10₁₂k’s = 20736₁₀s. Each k’s is exactly two of our current hours, and each “new second” is roughly two four of our current seconds. Enough of this Sumerian mixed base already!

    • What do you do when a piece you’re cutting isnt exactly a foot, say, 11 or 13 inches? I know nothing about woodworking, but I’m assuming there isnt a unified standard to make everything match to the nearest whole foot, so then this whole base 12 thing goes out the window, or am I missing something here?

      • Basically there is a conflict going on amongst the woodworkers of the world between those who think clearer in decimals, and those who think clearer in fractions. The fraction folks will tend to prefer standard units, the decimal thinkers will tend to prefer metric.

        What’s interesting to me is: you only ever hear Americans complaining about metric, but you never hear woodworkers from Europe or Japan talk about the advantages of standard units… while the Europeans and Japanese are also pumping out generally much higher-quality woodworking than most folks in the USA are. You can probably tell which I prefer lol

        My take is, if the standard units were really that much better, I think Japanese and French folks would be using them, because their cultures care a looot more about fine woodworking than the USA’s culture does.

        • Japan had their own system quite similar to inches that was so popular Japan had to ban the sale or transfer of the rulers.

      • You look at your tape measure, at the number 11 or 13 as appropriate, put a mark there, then take it to the saw and cut it.

    • Wow, base 12, I never thought of thas! You halve it, quarter it, and third it, and still end up with clean integers.

      • Yeah; you’ll often find boards in America milled to 3/4" or 1 1/2". Those are 1/16th or 1/8th of a foot. A lot of boards used in furniture are 3/4" thick. Half of 3/4 is 3/8, a third of 3/4 is 1/4. It solves the problems we need to solve, and the metric woodworkers start sounding how teaspoon/cup/quart cooks do.

    • I’m a carpenter as well, and I hear what you’re saying, but also my coworkers and I were just talking yesterday about how much better metric is 😅 Every base-12 advantage is weakened by the fact that I’m constantly expected to do fractions. Everything in metric is a whole number and it’s so hot. Love it when I get an actual number to build something to, instead of a math problem.

      If you’ve ever ordered lumber from a Canadian company, you know how much easier it is to calculate and order in metric units vs. board-feet. I feel bad for their sales reps who have to deal with us Yankeestanis.

      Also, all the really nice chisels and hand tools from Japan and Europe are already in metric.

    • I’ve setup a software that generate quotes, sales invoice and production order for a windows and door company. The sales person enter the dimensions and option of the window and it automatically calculate the price, the exact amount material, deduct it from the inventory and generate the cutting and assembly instruction.

      They were all working with fractional inches. I’ve started setting up the system using inches and it was a NIGHTMARE ! I quickly decided to convert everything on metric in the back end and to do all the calculations on that and I reconvert it in inches at the end.

      Now most of the workers are using metric because it just make more sense.

      • Wouldn’t it be

        • 0xA mm = 0x1 cm
        • 0x64 cm = 0x1 m
        • 0x3E8 m = 0x1 km
        • 0x1 km - 0x1 m = 0x3E7 m = 0x3E7/0x3E8 km = 0x0.FFBE76C8B4395810624D… km

        Edit: nvm I see what you mean, but then we should change the units too, to something like xmm, xcm etc.

        • That would still be a decimal system just written in a hexadecimal way.

    • Measurement system doesn’t have anything to do with numerical base. You can use any base with any system.

      16m = Fm

      which is pretty ass if you ask me

      • The biggest problem is that if you’re still using numbers that are designed for base 10 it’ll look messy no matter how you cut it. Hexadecimal is an approximation.

        • What do you mean Hex is an approximation?

          Each number in decimal is 1/10th and in Hex 1/16th ?

          • I mean we have numbers that go from 1 to 9 but if it was hexadecimal they would go to the equivalent of 15, not substitute letters.

  • You’ve been hit by…

    You’ve been struck by…

    A smooth metric system

  • 13 days

    The ratio of a circle’s circumference to its radius is now 10

  • And yet the cowards refuse to use megagrams. If SI prefixes are so great use them consistently rather than stealing other unit names and giving them another definition.

    Also metric byte sizes deserve the fires of hell. Powers of 2 or get out.

    • Ah yes, I need a hard drive containing 4 times 2 to the power of 40 bytes

      • statements dreamt up by the utterly deranged
    • We don’t use mega grams because kilo is the SI unit. And there’s no such thing as metric byte. That’s the sales department finding out that 104 MB is a larger number than 100 MiB.

      • In SI units a megagram would be equal to 1000 kilograms, because that’s how SI unit prefixes work. Except we call it a tonne instead, which I believe is what the original commenter is referencing.

        • Thank you for this pedantry, I will now remove the word “tonne” from my vocabulary and insist I have only ever heard of megagrams. Bless you